www.icenginc.com

	Home
	Services
	.: Printed circuit boards
	.: Reliablity testing
	.: ESD & latch-up testing
	.: Failure analysis
	Equipment
	.: Equipment one
	.: Equipment two
	.: Equipment three
	.: Equipment four
	Quality
	Employment
	News
	Our Location
	Contact
	Site Map

INNOVATIVE CIRCUITS ENGINEERING, INC.
is committed to providing the highest Quality Test Products and Services to its customers and continually improving the effectiveness of its Quality Management System

ESD Testing Request Form

1. Company Information:

Company*:

Contact name*:

Telephone*:

Fax*:

E-mail address*:

P.O. Number:

Number of units to test*:

Part Number:

Pkg. Type:

Requested turn time: Standard Expedite

2. Required Test & Standard: (Please select one)

HBM MIL-STD-883 HBM JEDEC Std HBM ESDA STM 5.1 HBM AEC-Q100-002 MM JEDEC-Std MM ESDA STM 5.2	MM AEC-Q100-003 CDM JEDEC Std CDM ESDA STM 5.3.1 CDM AEC-Q100-011 Customer Test. If other,

Please provide a pin list for the device

3. Number of Device Pins:

(includes no connections)

4. Number of No Connection Pins:

5. Please indicate power supply and ground groups that require to be tied separately:

6. Please specify the voltage and the number of devices for each voltage:

(Normally used three devices for each voltage step)

7. Number of test pulses:

8. Interval between pulses:

9. Are both polarities required?

Yes No

10. Is curved tracing of the pins required to determine pass/fail?

Yes No

Note: If curve tracing is required it should only be used as an indication that the pin I/V characteristics have changed. Curve tracing should NEVER be used in defining pass/fail criteria for qualification of a device. Both Mil Std. and JEDEC specify that only electrical test be used to determine whether the device has passed ESD testing.

11. If curve trace is required, please specify:

Force current/voltage to:		(mA) (V)
Limit current/voltage to:		(mA) (V)
What is the fail criteria?		%

(ICE normally uses 10% change in the I/V characteristics as the fail criteria)

Forward email for you:

Yes No